UHF RFID Integrated Long Range Gen 2 Reader / Writer
UHF RFID Integrated Long Range Gen 2 Reader / Writer(DW(100)9601)
            View Larger Image

     DW(100)9601 interrogator is a kind of 915M RFID interrogator, which is full frame and function. It includes RF module, digital signal managing, input/output port and serial communication port, synchronization function.

     DW(100)9601 interrogator is multi-protocol UHF interrogator, which supports ISO18000-6B and EPC potocol international standard it can read and write UCODE, TI, Alien and others label, besides it can optimize main applying label clip. It is convenient to upgrade interrogator's software to satisfying protocol expanding and function expanding to protect user's investment.

Application Usage
no packing and charging fee management of high-speed road(bridge), identifying car's brand management, cars'  management of organizing into groups and attempting, management of intelligent packing port, management of checking cars' entering and leaving frontier, supervising material's being out and in and identifying management, baggage and package's identifying management and containers on dock management and other fields.

Technology parameter

Specification Explanation
Operating Frequency 902MHz ~ 928MHz
RF protocol ISO18000-6B, EPC Class 1 , EPC Class 1 GEN 2
Operating Method FHSS or fixed frequency(setted by software)
Antenna ports 7dBi antenna within
Max RF power 30 dBm
Power smoothness < 0.5 DB
RF power range 20~30 dBm , Adjustable by software
Identify tag mode Fixed time automatically reads the tag;external trigger control reads the tag or the software control reads the tag,Identify tag mode can be setted
Identify tag time <8ms(Identify single tag)
Reading/Writing tag time Reads every 8 bytes to be smaller than 5ms,writes every 4 bytes to be smaller than 25ms
Reading/Writing tag distance >2m(antenna dependent)
Communication interface Type A : RS-232 , RS-485 , Wiegand26/34
Type B : RS-232 , RS-485 , Wiegand , USB
Type E : RS-232 , Wiegand , Ethernet
Type W : RS-232 , Wiegand , WiFi
Input/output 1triggering input
Power supply DC 5V
Power consumption <= 5W
Size 240mm * 240mm * 70mm
Work Temperature -10 °C to + 55 °C
Storage Temperature -20°C to + 85°C
Work status indication Buzzer

Function brief introduction

· Support multi-protocol: 9601 interrogator supports ISO18000-6B, EPC Class 1, EPC Class 1 GEN 2 standard, and also support many protocols and function expanding by through upgrading interrogator's software.

· Label capability optimizing: DooWa serial interrogators can optimize Label's operating used far-ranging. It uses different labels' expanding function to enhance the price-quality ratio of system's applying.

· Out off line function: the interrogator is designed with nonvolatile memory place. When the interrogator fail to communicate with applying suetem, it can memory identified ID Label into the interrogator to make sure the system is stable.

· ID match function: the interrogator is designed with nonvolatile memory place. In a close applying system, it can memory ID Label into the interrogator in advance. When the interrogator identifies Label ID, It can compare with the ID memorized the local PC, then depending on the result, it can run the interrogator's predefining or user designing'action.

· Synchronization function: In practice, many interrogators must be installed a near place, to make sure the reliability when interrogators working, DooWa serial interrogators were designed especially with synchronization function to make sure the reliability of identifying label and reading rate.

· Time function: There is real-time clock within interrogator, which can setup and read interrogator's time,identify time-stamp function under out off line. It can exactly satisfy the applying design that uses were sensitive for time.

· Input and output function: the interrogator is designed 2-way triggering input, which can identify the label when occurring outer things to satisfy green environment protecting and decrease energy consuming. It is especial suitable for parking port and producing line management. It is designed 2-way relay output, which user can use for outer controlling so that saving user's cost of applying system designed. User can transfer and control relay's switch status through the API function of DooWa-interrogator SDK and also can customize the controlling relationship according to the number of identified Label ID.

· Launching power separated control: can setup separated every channel's launching power to meet applying and installing's complexity, which is the first designed and created in internal country.


You May Also Like
  1. (RFID UHF Reader / Writer with Built-in Antenna)
    RFID UHF Reader / Writ...
  2. (Two-channel separate long-range RFID Reader/Writer)
    Two-channel separate l...
  3. (Multi-Protocol UHF Writer(Card-issuing))
    Multi-Protocol UHF Wri...